The Paneltec Sandwich Panel Machine incorporates a Caterpillar laminating press constructed from flat plates which give an even laminating pressure over the full area of the panel. The bottom bed incorporates PVC slats which can be interchangable to produce  Deep Profiled Roof panels or flat panels.

CLICK ON VIDEO LINK BELOW

The main press is the central part of the laminating process for the continuous lamination of various types of Composite Sandwich Panels.

Paneltec International Standard Machine Specification

Press Type— Caterpillar (DOUBLE BELT )or Roller 

Panel Joints— Interloc (standard), Optional extras:Deep Profile Roof (DPR), Secret Fix 

Panel Thickness— 40mm up to 300mm 

Panel Widths— 900mm up to 1200mm variable 

Production Rate— up to 8 metres / minute 

Steel Coil Weight— 5 Tonne-Optional extra: 8 tonne Hydraulic Extra 

Adhesive Flow Control— Adhesive flow and volumes controlled through the computer control panel 

Machine Controls— All functions controlled through the PLC controlled computer panel 

Core Trimming— Insulation core materials are accurately trimmed to exact widths by the cutter units on each side of the machine 

Face Profiles— 50mm wide Rib is included with the machine.

Microrib and Vee Rib are available as optional extras, the profile mechanism can be manual or automatically activated through the console 

Rollforming— Various edge joint profiles are formed by the rollforming units, the tooling can be easily changed 

Deep Profile Roof (DPR) machine— The optional DPR machine operates by feeding a continuous length of steel from the coil into the 19 station rollformer which forms a series of ribs in the panel face. The sheet is then fed into the laminating machine continuously where adhesive is applied and the insulation is bonded to the steel in the laminating process. 

Bandsaw Cut off— The Bandsaw is specially designed for ‘on the run’ cutting of the laminated panel. The computerised batching program ensures panels are cut to exact lengths